Heating
			Cirrus 25 Forced convection heating 5-40W / 100-240V The Cirrus 25 is a compact forced air PTC based heater with a cappacity of 5 to 40 Watt. With its 12 or 24 Volt fan, the Cirrus 25 is a perfect solution for cabin heating without natural convection. This pre-wired, small size heater (max. 72mm high) is very easy to install on a standard DIN-rail. Together with its indepandant fan circuit, it is created to aid climat cooling. VDE, CE, UL/cUL, CSA approved.
			Request	Details	DBK
			Cirrus 40 Forced convection heating 45-230W / 100-240V The Cirrus 40 is a compact forced air PTC based heater with a cappacity of 45 to 230 Watt. With its 12 or 24 Volts fan, the Cirrus 40 is a perfect solution for cabin heating without natural convection. This pre-wired medium size heater (max. 107 mm. high) is very easy to install on a standard DIN-rail. Together with its indepandant fan circuit, it is created to aid climat cooling. VDE, CE, UL, CSA approved.
			Request	Details	DBK
			Cirrus 60 Forced convection heating 200, 300 and 400W / 115 or 240VAC The Cirrus 60 is a compact forced air PTC based heater with a cappacity of 200, 300 or 400 Watt. With its 230 Volts fan, the Cirrus 60 is a perfect solution for cabin heating without natural convection. This pre-wired medium size heater (max. 96,5 mm. high) is very easy to install on a standard DIN-rail. Together with its indepandant fan circuit, it is created to aid climat cooling. VDE, CE, UL, CSA approved.
			Request	Details	DBK
			Cirrus 80 Forced convection heating 300-800W / 115-230V The Cirrus 80 is a high power forced air PTC based heater, with a capacity of 300 to 800 Watt. The high power to size ratio, makes it possible to fit this product in heacy duty environments. The Cirrus 80 is completed with screw terminals for easy wiring. Together with its indepandant fan circuit, it is created to aid climat cooling. CE, CSA, VDE, UL zpproved.
			Request	Details	DBK
			In-Line Thermostat Forced convection heating Temp. range 5-32° This pre-set thermostat is available for high and low voltage heaters of the Cirrus series. The in-line thermostat can be delivered as a kit or factory fitted and is produced with UL approved parts.
			Request	Details	DBK

		Nimbus B Natural convection heating 30-100W / 110-240V The Nimbus B is compact PTC based heater with a capacity of 30 to 100 Watt. This heating element gives good result in a natural convected environment. The PTC heating in combination with the aluminium body gives a good spread of the heat. Installing the Nimbus B is very easy because of the pre-wiring and DIN-rail clip on the back. CE, CSA,VDE, UL approved
		Request	Details	DBK

			Nimbus C Natural convection heating 20-40W / 110-240V The Nimbus C is a compact PTC based heater with a capacity of 20 to 40 Watt. This heating element gives good result in a natural convected environment. The PTC heating in combination with the aluminium body gives a good spread of the heat. Installing the Nimbus C is very easy because of the pre-wiring and the 4 fixing holes in aluminium body.
			Request	Details	DBK

			Nimbus D Natural convection heating 30-100W / 110-240V The Nimbus D is a compact rugged aluminium profile PTC based heater with a capacity of 30 to 1000 Watt. This heating element gives good result in a natural convected environment. The PTC heating in combination with the aluminium body gives a good spread of the heat. Installing the Nimbus D is very easy because of the pre-wiring and the Din clip on the aluminium
			Request	Details	DBK

		Nimbus P Natural convection heating 70-110 W / 110-240V The Nimbus P is a compact flat designed PTC based heater with a cappacity of 70 to 1100 Watt. This heating element is produced with the touch protection mounted to the heater. The PTC heating in combination with the aluminium body gives a good spread of the heat. Installing the Nimbus P is very easy because of the pre-wiring and the fixing holes in the aluminium body.
		Request	Details	DBK

			T-series Thermostat The normally closed version gives the opportunity to control the heater. The normaly open version is there to control the fan and signals. These versions are differentiated by the colour of the button. Easy DIN-rail mounting and screw terminals for easy installation.
			Request	Details	DBK

			PTC Conductive heating elements A large range of PTC heating elements gives us the opportunity to find the right solution for heating problems. There are build-in elements (EB, EC type), heating profiles (HR type) and heating disks (HT type). Temperature range from 40 to 300 degrees. UL, CSA and VDE approved.
			Request	Details	DBK