Controller boards
Wide range of controller boards and chip sets
to operate mechanisms
Include standard firmware to control the printer mechanism
to its optimum performance
License agreement available

CSM05

Drive any APS 5V mechanisms
Easy hardware configuration
Wide power supply range (4.5V to 9.5V)
Printing speed Up to 60mm/s
3 default communication ports
RS232 TTL
General purpose parallel interface (8051 bus type)
I2C Interface

new

Request

Details

APS

Compactboard
for MHTP/MCTP
The most competitive and compact controller board in its category
The Compact controller board has been engineered in order to fulfill the customer requirements in terms of both compactness and cost effectiveness
The Compact board addresses the following thermal printer mechanism series: MHTP/MCTP and CM/RM.
Chipset available
The Compact Board is available with powerful interfaces: RS232 and USB.

Request

Details

Axiohm

Minicont Para for CM/RM
Controller board available in three different interfaces
The Minicont Para has been designed to drive either 12V or 24V thermal printer mechanism series: HTP9012, HTP9024, CHTP9024 and CM/RM.
Three different interfaces are available: RS232, IEEE1284 or USB.

Request

Details

Axiohm

Optiboard
for XA/XB, TA/TB
The most competitive controller for Axiohm's XA/XB printer mechanism
AXIOHM has enriched its controller board offer with the Optiboard which features an unprecedented ratio performance versus price.
The Optiboard drives the famous Axiohm's XA/XB mechanism series.
RS232 and USB interfaces are available.
The Optiboard is able to manage Asian fonts through its external flash memory.

Request

Details

Axiohm

Uniboard for XA/XB
Controller board with daughter board concept
The Uniboard drives Axiohm's XA/XB mechanism series.
This controller board has been engineered with a daughter board concept which enables the customer to easily change the interface. The Uniboard offers three different interfaces: RS232, IEEE1284 and USB.
Through the Uniboard, you can manage two external stepper motors, as well as Asian fonts with the external flash memory.

Request

Details

Axiohm

Uniboard advanced
for XA/XB
The Uniboard Advanced has been specially tailored to drive the XA/XB Advanced mechanism series.
Controller board with daughter board concept
This controller board allows high standard print quality with a speed reaching up to 180 mm/s. It has also been engineered with a daughter board concept which enables the customer to easily change the interface. Uniboard Advanced offers three different interfaces: RS232, IEEE1284 and USB. to reach a high standard print quality above 200 mm/sec.
Through the Uniboard Advanced, you can manage two external stepper motors, as well as Asian fonts with the external flash memory.

Request

Details

Axiohm

Uniboard premium
for XA/XB
Controller board for high speed mechanisms
(XA/XB Premium)
Uniboard Premium was designed to manage AXIOHM’s high speed thermal printer mechanism:
the XA/XB Premium.
The completion of this high speed controller board followed three years of extensive R&D work at AXIOHM to reach a high standard print quality above 200 mm/sec.
The Uniboard Premium features a daughter board concept which offers customers a choice between three different interfaces: RS232, IEEE1284 and USB.
This controller board performs Asian font management through its external flash memory.

Request

Details

Axiohm

Gebe controllerboard for APS
Controller GCT-3182

For Seiko LTP1245 and APS MP1245 Printer mechanisms

Request

Details

Gebe

Gebe controllerboard for APS
GCT-4282 for APS MP205

RS232, Centronics
Winder
Battery charging system
EEPROM

Request

Details

Gebe

Gebe controllerboard for APS
Controller GCT-3182

GCT-4382 Printer controller series Over View
Controler for Easyloading thermal printer mechanism series GPT-4302 (ELM205)
RS232, centronics, USB, blue tooth, IrDA, battery charging system, winder, SPI bus (card reader, etc.) OPD menu, EEPROM

Request

Details

Gebe

Gebe controllerboard for APS
GCT-4392 Atmel
for ELM-208LV

RS 232, USB, low cost version

Request

Gebe

Gebe controllerboard for APS
GCT-4192 Atmel
for SS-205/EPM211

RS 232, USB, low cost version

Request

Gebe

Gebe controllerboard for APS
GCT-6583 for FM-205

RS232, USB

Request

Gebe

Gebe controllerboard for APS
GCT-4378 for LPM

RS232, USB

Request

Gebe

Gebe controllerboard for APS
GCT-4482 for ELM-4071

RS232, USB, centronics, IrDA, blue tooth, SPI bus, Winder, battery charging, EEPROM

Request

Gebe

Gebe controllerboard for APS
GCT-4482 for ELM-3071

RS232, different emulations, winder, EEPROM

Request

Gebe

Gebe controllerboard for APS
GCT-4479 for CP-405-CNN SS

Centronics

Request

Gebe